PRODIRECTOR XS2 (replaced by ProDirector 7)
Mobile, fast and precise
The ProDirector XS2 laser contour projector allows the positioning of a part on a table, workbench or tooling.
In most industrial processes, operators must follow an assembly plan detailing the assembly order precisely. The manufacturing range is a succession of steps that must be respected in order to guarantee quality. High and consistent quality can only be achieved by rigorously respecting the manufacturing range.
Our laser projection systems therefore help operators during the assembly phases.
With our software suite, the design office can directly transmit the manufacturing range with clear and precise instructions on location, orientation and how to assemble.
The ProDirector XS2 laser projector shows the exact location where the part should be placed.
The thickness of the laser line is adjustable, from 0.5mm to 2mm.
The brightness of the laser line is adjusted according to the ambient lighting in your workshop, but can also be modified by the user.
Supplied with mounting bracket, cables and software.
Technical Description:
Technology: 532nm laser diode (bright green)
Laser line thickness: from 0.5mm to 2mm (depending on the distance of use)
Stroke brightness: user adjustable.
Accuracy: ± 0.30mm on a surface of 5 x 5 meters at a distance of 4m
(corresponds to a projection angle of 80°)
Projection repeatability: +/-0.02mm
Max projection angle: Horizontal: 85°, Vertical: 82°
Laser power: from 1mW to 50mW
Technology: 532nm laser diode (bright green)
Laser class: Class 2M according to IEC/EN 60825-1:2007 CE certified.
Power supply: 220V/24V
Connection: USB or Wireless
Consumption: 75W
Operating temperature: between +5°C and +45°C
Protection: IP54 (dust)
Humidity: less than 90%
Dimensions
Length: 336 mm,
Width: 117 mm,
Height: 180 mm,
Weight: 5.5 kg
Products related to this article:
OPTIONS AND SOFTWARE
