PRODIRECTOR 6 (replaced by ProDirector 7 LR)
Robust and precise for large projections
The ProDirector 6 laser contour projector allows the positioning of a part on a large table, workbench or large tooling.
In most industrial processes, operators must follow an assembly plan detailing the precise order of assembly. The manufacturing process is a succession of steps that must be respected in order to guarantee quality. High and consistent quality can only be achieved by rigorously respecting the manufacturing process.
Our laser projection systems therefore help operators during the assembly phases.
With our software suite, the design office can directly transmit the manufacturing range with clear and precise instructions on location, orientation and how to assemble.
The ProDirector 6 laser projector shows the exact location where the part should be placed.
The thickness of the laser line is adjustable, from 1mm to 2mm.
The brightness of the laser line is adjusted according to the ambient lighting in your workshop, but can also be modified by the user.
Supplied with mounting bracket, cables and software.
Technical Description:
Technology: 532nm laser diode (green light)
Laser power: from 5mW to 50mW
Laser line thickness: from 1mm to 2mm (depending on the distance of use)
Stroke brightness: user adjustable.
Accuracy: ± 0.30mm on a surface of 5 x 5 meters at a distance of 4m
(corresponds to a projection angle of 80°)
Projection repeatability: +/-0.02mm
Max projection angle: Horizontal: 85°, Vertical: 82°
Laser class: Class 2M according to IEC/EN 60825-1:2007 CE certified.
Power supply: 220V/24V
Connection: USB or Wireless
Consumption: 75W
Operating temperature: between 0°C and +45°C
Protection: IP54 (dust)
Humidity: less than 85%
Dimensions:
Length: 480 mm
Width: 170 mm
Height: 290 mm
Weight: 13 kg
Products related to this article:
OPTIONS AND SOFTWARE
